| Cover | 1 |
| ToC | 3 |
| Editorial Team | 6 |
| Sister Associations | 9 |
| Y. Xu, Y. Cai, D. Li, T. Zhang - Building crack monitoring based on digital image processing | 13 |
| H. Ghahramanzadeh Asl, S. Çam, O. Orhan, A. Özel - Experimental and numerical analysis of epoxy based adhesive failure on mono- and bi-material single lap joints under different displacement rates | 21 |
| W. Xiangming, G. Erfu - Numerical analysis and verification of residual stress in T joint of S355 steel | 37 |
| O. Kryvyi, Y. Morozov - Thermally active interphase inclusion in a smooth contact conditions with transversely isotropic half-spaces | 45 |
| B. E. Sobrinho, G. Gomes, W. V. da Silva, R. S. Y. R. C. Silva, L. M. Bezerra, E. U. L. Palechor - Differential evolution algorithm for identification of structural damage in steel beams | 63 |
| A. Ahmadi, G.H. Farrahi, K. Reza Kashyzadeh, Sh. Azadi, K. Jahani - A comparative study on the fatigue life of the vehicle body spot welds using different numerical techniques: Inertia relief and Modal dynamic analyses | 79 |
| M. F. Bouali, A. Hima - Alternative estimation of effective Young’s Modulus for Lightweight Aggregate Concrete LWAC | 94 |
| M. Saadatmand, R. Talemi - Study on the thermal cycle of Wire Arc Additive Manufactured (WAAM) carbon steel wall using numerical simulation | 110 |
| B. Paermentier, D. Debruyne, R. Talemi - Numerical modelling of dynamic ductile fracture propagation in different lab-scale experiments using GTN damage model | 117 |
| A. Laureys, M. Pinson, L. Claeys, T. De Seranno, T. Depover, K. Verbeken - Initiation of hydrogen induced cracks at secondary phase particles | 125 |
| R. Hadj Boulenouar, B. Boutabout, N. Djebbar - Three-dimensional numerical analysis of a joint bonded reinforced with silica nanoparticles (SiO2) | 140 |
| S. Budhe, M.D. Banea, S. de Barros - Prediction of the burst pressure for defective pipelines using different semi-empirical models | 149 |
| A. Ayadi, K. Meftah, S. Sedira - Elastoplastic analysis of plane structures using improved membrane finite element with rotational DOFs | 160 |
| J. Kasivitamnuay, P. Singhatanadgid - Object-Oriented Software for Fitness-For-Service Assessment of Cracked Cylinder Based on API RP 579 | 175 |
| A. Drai, B. Aour, N. Belayachi, A. Talha, N. Benseddiq - Finite element modeling of the behavior of polymethyl-methacrylate (PMMA) during high pressure torsion process | 193 |
| H. EL-Emam, A. El-Sisi, R. Reda, M. Seleem, M. Bneni - Effect of concrete cover thickness and main reinforcement ratio on flexural behavior of RC beams strengthened by NSM-GFRP bars | 209 |
| H. Latifi, N. Amini - Effect of aggregate type on moisture susceptibility of modified cold recycled mix asphalt: evaluation by mechanical tests and Surface Free Energy method | 223 |
| N. Hebbar, I. Hebbar, D. Ouinas, M. Bourada - Numerical modeling of bending, buckling, and vibration of functionally graded beams by using a higher-order shear deformation theory | 242 |
| C. Caselle, S. Bonetto, D. Costanzo - Crack coalescence and strain accommodation in gypsum rock | 259 |
| W. N. Bouzitouna, W. Oudad, M. Belhamiani, D. E. Belhadri, L. Zouambi - Elastoplastic analysis of cracked Aluminum plates with a hybrid repair technique using the bonded composite patch and drilling hole in opening mode I | 268 |
| J. Akbari, M. Ahmadifarid, A. Kazemi Amiri - Multiple crack detection using wavelet transforms and energy signal techniques | 281 |
| M. Fouzia, L. Abdelkader, M. Abdelkader, S. Abderahmane - Optimization design based approach for the determination and minimization of the displacement under tensile load in hybrid composite joint | 293 |
| A.V. Tumanov, V.N. Shlyannikov, A.P. Zakharov - Crack growth rate prediction based on damage accumulation functions for creep-fatigue interaction | 311 |