PSI - Issue 51

Liting Shi et al. / Procedia Structural Integrity 51 (2023) 102–108 L. Shi et al. / Structural Integrity Procedia 00 (2022) 000–000

107

6

structural stress analysis, all the fatigue data fall onto one master curve indicating that the aluminum-steel weld nugget diameter dominates fatigue life of the RSWs. Acknowledgements The authors thank the financial support from Canadian Federal Government Energy Innovation Program, Mission and Innovation Energy End User Program, GM Canada, and CanmetMATERIALS. The authors are grateful for the technical support from Jie Liang, Pei Liu, Dr. Jian Li, Dr. Babak Shalchi-Amirkhiz at CanmetMATERIALS. References Abe, Y., Kato, T., Mori, K.-I., Nishino, S., 2014. Mechanical clinching of ultra-high strength steel sheets and strength of joints. Journal of Materials Processing Technology 214, 2112–2118. Chen, N., Wang M., Wang H.P., Wan Z., Carlson B.E., 2018. Microstructural and mechanical evolution of Al/steel interface with Fe2Al5 growth in resistance spot welding of aluminum to steel. Journal of Manufacturing Processes 34, 424–434. Duran E.T., 2022. Finite element based Multi-axial low cycle fatigue analyses of spot-welded components and correlation with tests. Engineering Failure Analysis 132, 105899. Emrea, H.E., Bozkurtb, B., 2020. Effect of Cr-Ni coated Cu-Cr-Zr electrodes on the mechanical properties and failure modes of TRIP800 spot weldments. Engineering Failure Analysis 110, 104439. Ghanbari, H.R., Shariati, M., Sanati, E., Nejad, R.M., 2022. Effects of spot welded parameters on fatigue behavior of ferrite-martensite dual-phase steel and hybrid joints. Engineering Failure Analysis 134, 106079. Gao, X., Chen, C., Ren, X., Li, Y., 2022. Investigation on failure mechanism of the square clinched joints with different sheet thicknesses. Engineering Failure Analysis 134, 106013. Kang, H.T., Accorsi, I., Patel, B., Pakalnins, E., 2010. Fatigue performance of resistance spot welds in three sheet stack-ups. Procedia Engineering 2, 129-138. Kang, J., Chen, Y., Sigler, D., Carlson, B., Wilkinson, D.S., 2016. Effect of adhesive on fatigue property of Au-ral2 to AA5754 dissimilar aluminum alloy resistance spot welds. Engineering Failure Analysis 69, 57-65. Kang, J., Shi, L., Shalchi-Amirkhiz, B., Sigler, D., Haselhuhn, A.S., Carlson, B., 2020. Microstructure and shear strength of novel aluminum to steel resistance spot welds. Welding Journal 99, 67s-74s. Lei, Z., Kang, H.T., Liu, Y., 2011. Finite element analysis for transient thermal characteristics of resistance spot welding process with three sheets assemblies. Procedia Engineering 16, 622-631. Li, L., Jiang, H., Zhang, R., Luo, W., Wu, X., 2022. Mechanical properties and failure behavior of flow-drilling screw-bonding joining of dissimilar aluminum alloys under dynamic tensile and fatigue loading. Engineering Failure Analysis 139, 106479. Li, Y., Yan, F., Luo, Z., Chao, Y.J., Ao, S., Cui, X., 2015. Weld growth mechanisms and failure behavior of three-sheet resistance spot welds made of 5052 aluminum alloy. Journal of Materials Engineering and Performance 24, 2546-2555. Li, Y., Zhang, Y., Luo, Z., Shan, H., Feng, Y.Q., Ling, Z.X., 2016. Failure mode transition of triple-thin-sheet aluminum alloy resistance spot welds under tensile-shear loads. Welding Journal 95, 479-s-490-s. Manladan, S.M., Yusof, F., Ramesh, S., 2017. A review on resistance spot welding of aluminum alloys. International Journal of Advanced Manufacturing Technology 90, 605–634. Nielsen, C.V., Friis, K.S., Zhang, W., Bay, N., 2011. Three-sheet spot welding of advanced high-strength steels. Welding Journal 90, 32-s-41-s. Pouranvari, M., 2017. Critical assessment 27: dissimilar resistance spot welding of aluminum/steel: challenges and opportunities. Materials Science and Technology 33, 1705–1712. Pouranvari, M., Marashi, S.P.H., 2011. Critical sheet thickness for weld nugget growth during resistance spot welding of three-steel sheets. Science and Technology of Welding and Joining 16, 162-165. Qiu, R., Satonaka, S., Iwamoto, C., 2009. Effect of interfacial reaction layer continuity on the tensile strength of resistance spot welded joints between aluminum alloy and steels. Materials and Design 30, 3686–3689. Rao, H., Kang, J., Shi, L., Sigler, D.S., Carlson, B.E., 2018. Effect of specimen configuration on fatigue properties of dissimilar aluminum to steel resistance spot welds. International Journal of Fatigue 116, 13-21. Rupp, A., Storzel, K., Grubisic, V., 1995. Computer aided dimensioning of spot-welded automotive structures. SAE Technology Papers, 950711. Shi, L., Kang, J., Shalchi-Amirkhiz, B., Sigler, D.S, Haselhuhn, A.S., Carlson, B.E., 2019. Effect of coating type on microstructure and mechanical behavior of resistance spot welds of thin X626 aluminum sheet to low carbon steel. Journal of Materials Processing Technology 264, 438-447. Shi, L., Kang, J., Chen, X., Haselhuhn, A.S, Sigler, D.R., Carlson, B.E., 2020. Effect of material inhomogeneity on fracture modes in aluminium– steel resistance spot welds, Fatigue and Fracture of Engineering Materials and Structures 43, 2157-2168. Shi, L., Kang, J., Gesing, M., Chen, X., Haselhuhn, A.S., Carlson, B.E., 2020. Effect of notch root angle on fatigue behavior of aluminum to steel resistance spot welds, International Journal of Fatigue, 141, 105866. Shi, L., Kang, J., Qian, C., Liang, J., Shalchi-Amirkhiz, B., Haselhuhn, A.S., Carlson, B.E., 2022. Role of Fe2Al5 in fracture of novel dissimilar aluminum-steel resistance spot welds using multi-ring domed electrodes. Materials Science and Engineering A 831, 142233. Sigler D.R., 2013. Welding Electrode with Contoured Face. U.S. Patent Application 8,436,269.