| Cover | 1 |
| TOC | 3 |
| Editorial Team | 9 |
| Sister Associations | 12 |
| Editorial | 14 |
| Y. Chang, L. Zheng, X. Pan, Y. Hong Further investigation on microstructure refinement of internal crack initiation region in VHCF regime of high-strength steels | 15 |
| E. Breitbarth, T. Strohmann, M. Besel, S. Reh Determination of Stress Intensity Factors and J integral based on Digital Image Correlation | 26 |
| J. A. O. González, J. T. P. de Castro, G. L. G. Gonzáles, M. A. Meggiolaro, J. L. de França Freire Verification of the ΔKeff hypothesis along the fatigue crack path in thin and thick Al specimens | 40 |
| Yu. G. Matvienko Comparison of the constraint parameters in elastic-plastic fracture mechanics | 50 |
| G. Meneghetti, A. Campagnolo, F. Berto Averaged strain energy density estimated rapidly from the nodal stresses by FEM for cracks under mixed mode loadings including the T-stress contribution | 59 |
| L. Malíková, H. Šimonová, B. Kucharczyková, P. Miarka Multi-parameter fracture mechanics: crack path in a mixed-mode specimen | 71 |
| G. L. G. Gonzáles, J. A. O. González, J. T. P. de Castro, J. L. de França Freire Using DIC techniques to measure strain ranges inside the cyclic plastic zone ahead of a fatigue crack tip | 80 |
| G. Meneghetti, M. Ricotta, G. Pitarresi On relation between J-integral and heat energy dissipation at the crack tip in stainless steel specimens | 88 |
| S. Seitl, P. Miarka, V. Růžička, L. Malíková, A. S. Cruces, P. Lopez-Crespo Approximation of the crack-tip field in fatigue cracks in bridge steel specimens: DIC analysis of different constraint levels | 103 |
| T. Profant, J. Pokluda The ab-initio aided strain gradient elasticity theory: a new concept for fracture nanomechanics | 113 |
| P. Trusov, E. Makarevich, N. Kondratev Multi-level model describing phase transformations of polycrystalline materials under thermo-mechanical impacts | 121 |
| O. Y. Smetannikov, Y. A. Kashnikov, S. G. Ashikhmin, A. E. Kukhtinskiy Numerical model of fracture growth in hydraulic re-fracturing | 136 |
| M. Zhelnin, A. Kostina, O. Plekhov, I. Panteleev, L. Levin Numerical analysis of application limits of Vyalov’s formula for an ice-soil thickness | 152 |
| M. Semin, L. Levin Numerical simulation of frozen wall formation in water-saturated rock mass by solving the Darcy-Stefan problem | 163 |
| V. P. Matveenko, N. A. Kosheleva, G. S. Serovaev, A. Yu. Fedorov Numerical analysis of the strain values obtained by FBG embedded in a composite material using assumptions about uniaxial stress state of the optical fiber and capillary on the Bragg grating | 173 |
| A. Zh. Akhmetov, I. Yu. Smolin, A. Yu. Peryshkin Numerical analysis of the state of stress and strain in the Yenisei Ridge based on the regional tectonic state in the Asian continent | 186 |
| S. Smirnov, L. Zamaraev Comparative study of Shot creep of single-phase titanium alloys in air and neutral gas environment on the test temperature in range from 673 to 1323 K | 197 |
| N. G. Burago, I. S. Nikitin, A. D. Nikitin, B. A. Stratula Algorithms for calculation damage processes | 208 |
| V. Matveenko, I. Shardakov, T. Korepanova Construction of analytical eigensolutions for isotropic conical bodies and their application for estimation of stresses singularity | 221 |
| Y. Bayandin, N. Saveleva, O. Naimark Steady plastic wave fronts and scale universality of strain localization in metals and ceramics | 239 |
| A. Baryakh, S. Lobanov On one approach to the numerical modeling of the strain-stress state of layered rock mass | 253 |
| N. S. Popova, E. M. Morozov, Y. G. Matvienko Predicting the crack path in a wedge under a concentrated tensile force by means of variational principle | 263 |
| O. Naimark Duality of singularities of multiscale damage localization and crack advance: length variety in Theory of Critical Distances | 268 |
| M. Abbadeni, I. Zidane, H. Zahloul, Z. Madaoui Comparative study of conventional and hydromechanical deep drawing processes based on finite element analysis | 278 |
| S. Djaballah, K. Meftah, K. Khelil, M. Tedjini, L. Sedira Detection and diagnosis of fault bearing using wavelet packet transform and neural network | 287 |
| A. Kostina, M. Zhelnin, O. Plekhov Numerical analysis of a caprock integrity during oil production by steam-assisted gravity drainage method | 298 |
| A. Vedernikova, A. Iziumova, A. Vshivkov, O. Plekhov The approach to fracture diagnosis by means of experimental measurements of the stored energy | 310 |
| M. Hamdi, R. Zenasni, M.A. Khiat Critically evaluating mechanics of structure genome-based micromechanics approach | 317 |
| N. Kaddouri, K. Madani, M . A. Bellali, X. Feaugas Analysis of the presence of bonding defects on the fracture behavior of a damaged plate repaired by composite patch | 327 |
| A. Guillal, N. Abdelbaki, M.E.A. Bensghier, B. Kopei Effect of shape factor on structural reliability analysis of a surface cracked pipeline-parametric study | 337 |
| A. Abdelhalim, G. Abdelmoumene, D. Lamia, D. Abderrazek ANN Approach to Predict the Flow Stress of CMn (Nb-Ti-V) Micro Alloyed Steel | 346 |
| G. M. Dominguez Almaraz, L. M. Torres Duarte, C. J. Torres Pacheco Tension - torsion fatigue tests on the proton exchange membrane Nafion 115 (Perfluorosulfonic acid) | 356 |
| A.V. Vakhrushev, A.Y. Fedotov Simulation of deformation and fracture processes in nanocomposites | 366 |
| M. Bannikov, D. Bilalov, V. Oborin, O. Naimark Damage evolution in the AlMg6 alloy during high and very high cycle fatigue | 379 |
| M. Tashkinov, D. Ershova, A. Shalimov Computational multi-scale analysis of simultaneous processes of delamination and damage accumulation in laminated composites | 392 |
| S.A.G. Pereira, S.M.O. Tavares, P.M.S.T. de Castro Mixed mode fracture: numerical evaluation and experimental validation using PMMA specimens | 408 |
| L. Suchý, E. Leidich, A. Hasse, T. Gerstmann, B. Awiszus Fatigue strength of inner knurled interference fit joined by forming and cutting methods | 425 |
| F.J.P. Moreira, R.D.S.G. Campilho Use of the XFEM for the design of adhesively-bonded T-joints | 431 |
| S. Pereira, A. Carvalho, L. Reis, M. Freitas, D. Montalvão Characterisation and evaluation of the mechanical behaviour of endodontic-grade NiTi wires | 446 |
| B. G. N., Muthanna, O., Bouledroua, M., Meriem-Benziane, M., Hadj Meliani, G., Pluvinage, R. K. Suleiman Numerical study of semi-elliptical cracks in the critical position of pipe elbow | 459 |
| H. Araújo, M. Leite, A.M.R. Ribeiro, A.M. Deus, L. Reis, M.F. Vaz Investigating the contribution of geometry on the failure of cellular core structures obtained by additive manufacturing | 474 |
| M. J. Adinoyi, N. Merah, J. Albinmousa Analysis of Low-Cycle Fatigue Behavior of AW2099-T83 Al-Li Alloy | 483 |
| D. Kumar, G. Jayaraman, M. Swamy, A. H. V. Pavan, Antony M. C. Harison, A. N. Sudhakar Optimization of Vanadium Content for Achieving Higher Wear Resistance and Hardness in High Cr-V White Cast Irons for Ball Tube Mill Liner Application | 503 |
| A. Kumar, Y.V. Nagaraja Bhat, B.K. Sreedhar, S.I. Sundar Raj, V.Prakash, P. Selvaraj Structural Integrity Assessment of Weld for Joining Waveguide to Annular Linear Induction Pump Subjected to Vibration | 511 |
| R. Suresh Kumar, B.N. Rao, K. Velusamy, S. Jalaldeen Specimen Level and Component Level Simulations of Fatigue Crack Growth Behavior under Cyclic Bending | 522 |
| R. V. Prakash, M. John Post- Impact Fatigue Damage Analysis of Quasi Isotropic CFRP Laminates through Infrared Thermography | 532 |
| E.H, Besseghier, A, Djebli, M, Bendouba, A, Baltach, A, Aid A 3D analysis of crack-front shape of asymmetric repaired aluminum panels with composite patches | 543 |
| C.Y. Liu, Y. Wang, X.P. Zhang, L.Z. Du Rock brittleness evaluation method based on the complete stress-strain curve | 553 |
| R. Marat-Mendes, R. Martins, A. Garcia, L. Reis Flexural testing and analysis of full-strain-fields in sandwich composites | 564 |
| Z. Rachid, A. K. Djafar, S. Abderahmane, M. Abdelmadjid, B. Smail Numerical simulation of a crack emanating from a micro-cavity in the orthopedic cement by technical sub modeling of total hip prosthesis | 582 |
| D. E. Belhadri, M. Belhamiani, W. N, Bouzitouna, W. Oudad Stress intensity factors analyses for external semi-elliptical crack for repaired gas-pipeline by composite overwrap under pressure | 595 |
| E.Y.L. Palechor, L.M. Bezerra, M. V. G. de Morais, R.S.Y.R.C. Silva, E.N. Barros Damage identification in beams using additional rove mass and wavelet transform | 610 |
| M. H. Miloud, I. Zidane, M. Mendas Coupled identification of the hardening behavior laws and Gurson–Tvergaard–Needleman damage parameters - Validation on tear test of 12NiCr6 CT specimen | 626 |
| H. Berrekia, D. Benzerga, A. Haddi Behavior and damage of a pipe in the presence of a corrosion defect depth of 10% of its thickness and highlighting the weaknesses of the ASME / B31G method | 639 |
| A. Bendada, D. Boutchicha, A. Chouiter, M. Miri Numerical-Experimental characterization of honeycomb sandwich panel and numerical modal analysis of implemented delamination | 651 |
| Y. Saadallah, S. Derfouf, B. Guerira A viscoelastic-viscoplastic model for a thermoplastic and sensitivity of its rheological parameters to the strain-rate | 662 |
| L. Restuccia Fracture properties of green mortars with recycled sand | 672 |
| E. Abdelouahed, H. Benzaama, M. Mokhtari, B. Aour Pipeline repair by composite patch under temperature and pressure loading | 686 |
| E. Abdelouahed, M. Mokhtari, H. Benzaama Finite Element Analysis of the thermo-Mechanical Behavior of composite Pipe Elbows under Bending and Pressure loading | 694 |
| Y. Liu, J. Ren, Z. Li, Q. Gao S. Zhao Carbonation Resistance of Reinforced Concrete under Bending Load | 710 |
| M. L. Puppio, L. Giresini Estimation of tensile mechanical parameters of existing masonry through the analysis of the collapse of Volterra’s urban walls | 721 |
| C. Bellini, V. Di Cocco, F. Iacoviello, L. Sorrentino Experimental analysis of aluminium/carbon epoxy hybrid laminates under flexural load | 735 |
| A. En-naji, N. Mouhib, H. Farid, M. El Ghorba Prediction of thermomechanical behavior of acrylonitrile butadiene styrene using a newly developed nonlinear damage-reliability model | 744 |
| H. Chbani, B. Saadouki, M. Boudlal, M. Barakat Determination of fracture toughness in plain concrete specimens by R curve | 759 |
| A. Pola, D. Battini, M. Tocci, A. Avanzini, L. Girelli, C. Petrogalli, M. Gelfi Evaluation on the fatigue behavior of sand-blasted AlSi10Mg obtained by DMLS | 771 |
| C. Bellini, G. Giuliano, L. Sorrentino Friction influence on the AA6060 aluminium alloy formability | 787 |
| D. A. Oshmarin, M. A. Iurlov, N. V. Sevodina, N. A. Iurlova Possibility of tuning shunt circuits for multimodal damping of vibrations of structure with piezoelectric element | 796 |
| S.A. Bochkarev, S.V. Lekomtsev, A.N. Senin Analysis of spatial vibrations of piezoceramic eccentric cylindrical shells interacting with an annular fluid layer | 810 |
| H. Cao Analysis of mechanical properties of transition segment of road and bridge based on high-strength foam concrete | 827 |