PSI - Issue 47

D. Cortis et al. / Procedia Structural Integrity 47 (2023) 908–914 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

914

7

behaviour of CuCrZr alloy. In order to tailor the alloy for a specific application it is essential to carefully select both additive manufacturing parameters and aging temperature and time.

References

Barabash, V.R., Kalinin, G.M., Fabritsiev, S.A. et al., 2011. Specification of CuCrZr alloy properties after various thermo-mechanical treatments and design allowables including neutron irradiation effects, Journal of Nuclear Materials 417, 904-907. Brotzu, A., Felli, F., Pilone, D. et al. 2019. Study of CuCrZr alloy for the production of a passive satellite, Procedia Structural Integrity 18, 742 748. Brotzu, A, Felli, F, Pilone, D, et al., 2020. Study of the fracture behavior of a CuCrZr alloy. Mat Design Process Comm. 2:e113. Guan, P., Chen, X., Liu, P. et al., 2019. Effect of selective laser melting process parameters and aging heat treatment on properties of CuCrZr alloy. Materials Research Express 6 , 1165c1. Hu, Z., Du, Z., Yang, Z. et al., 2022. Preparation of Cu–Cr–Zr alloy by selective laser melting: Role of scanning parameters on densification, microstructure and mechanical properties, Materials Science and Engineering: A836, 142740. Kuai, Z., Li, Z., Liu, B. et al., 2022, Selective laser melting of CuCrZr alloy: processing optimisation, microstructure and mechanical properties, Journal of Materials Research and Technology 19, 4915-4931. Mishnev, R., Shakhoba, I., Belyakov, A. et al., 2015. Deformation microstructures, strengthening mechanisms, and electrical conductivity in a CuCr–Zr alloy. Mater. Sci. Eng., A 629, 29–40. Ostachowski, P., Bochniak, W., Łagoda, M. et al. , 2019. Strength properties and structure of CuCrZr alloy subjected to low-temperature KOBO extrusion and heat treatment. Int J Adv Manuf Technol 105, 5023–5044. Peng, L., Xie, H., Huang, G. et al., 2014. Dynamic of phase transformation in Cu–Cr–Zr alloy. Adv. Mater. Res. 887–888, 333–337. Popovich, A., Sufiiarov, V., Polozov, I. et al. 2016. Microstructure and mechanical properties of additive manufactured copper alloy, Mater. Lett. 179, 38–41. Salvan, C., Briottet, L., Baffie, T. et al., 2021. CuCrZr alloy produced by laser powder bed fusion: Microstructure, nanoscale strengthening mechanisms, electrical and mechanical properties, Materials Science and Engineering: A826, 141915. Sun, F., Liu, P., Chen, X., Zhou, H., Guan, P., & Zhu, B. (2020). Mechanical Properties of High-Strength Cu–Cr–Zr Alloy Fabricated by Selective Laser Melting. Materials 13, 5028. Tang, X., Chen, X., Sun, F. et al., 2022. A Study on the Mechanical and Electrical Properties of High-strength CuCrZr Alloy Fabricated Using Laser Powder Bed Fusion. Journal of Alloys and Compounds 924, 166627. Vinogradov, A., Patlan, V., Suzuki, Y. et al., 2002. Structure and properties of ultra-fine grain Cu–Cr–Zr alloy produced by equal-channel angular pressing. Acta Mater. 50, 1639–1651. Wallis C., Buchmayr B., 2019. Effect of heat treatments on microstructure and properties of CuCrZr produced by laser-powder bed fusion, Materials Science and Engineering A744, 215 – 223. Xia, C., Jia, Y., Zhang, W. et al., 2012. Study of deformation and aging behaviors of a hot rolled– quenched Cu–Cr–Zr–Mg–Si alloy during thermomechanical treatments. Mater. Des. 39, 404–409. Zhang, Y., Volinsky, A., Tran, H., et al., 2016. Aging behavior and precipitates analysis of the Cu–Cr–Zr–Ce alloy. Mater. Sci. Eng., A 650, 248– 253. Zhou, J., Huang, Y., Li, Z. et al, 2022. Effect of heat treatments on microstructure, mechanical and electrical properties of Cu–Cr–Zr alloy manufactured by laser powder bed fusion. Materials Chemistry and Physics 296, 127249.