PSI - Issue 47

684 Bayu Anggara et al. / Procedia Structural Integrity 47 (2023) 675–684 Bayu Anggara, Dominicus Danardono DPT*, Eko Prasetya Budiana / Structural Integrity Procedia 00 (2019) 000 – 000 10 Fernandez-Gamiz, Unai et al. 2018. “Computational Modelling of Rectangular Sub-Boundary Layer Vortex Generators.” Applied Sciences (Switzerland) 8(1): 1–16. Fouatih, Omar Madani, Marc Medale, Omar Imine, and Bachir Imine. 2016. “Design Optimization of the Aerodynamic Passive Flow Control on NACA 4415 Airfoil Using Vortex Generators.” European Journal of Mechanics, B/Fluids 56: 82–96. http://dx.doi.org/10.1016/j.euromechflu.2015.11.006. Galera, L. et al. 2019. “A Triangular Vortex Generator Modeling on a DU97-W-300 Airfoil by a Source Term Model.” Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 233(5): 635–45. Ghanem, Akram et al. 2013. “Energy Efficiency in Process Industry - High-Efficiency Vortex (HEV) Multifunctional Heat Exchanger.” Renewable Energy 56: 96–104. Jacobson, Mark Z. 2009. “Review of Solutions to Global Warming, Air Pollution, and Energy Security.” Energy and Environmental Science 2(2): 148–73. Jin, Xin, Gaoyuan Zhao, Kejun Gao, and Wenbin Ju. 2015. “Darrieus Vertical Axis Wind Turbine: Basic Research Methods.” Renewable and Sustainable Energy Reviews 42: 212–25. http://dx.doi.org/10.1016/j.rser.2014.10.021. Kolkman, Dennis et al. 2018. “Experimental Characterization of Vortex Generators Induced Noise of Wind Turbines.” 2018 AIAA/CEAS Aeroacoustics Conference . Li, Xin kai et al. 2019. “Analysis of the Effect of Vortex Generator Spacing on Boundary Layer Flow Separation Control.” Applied Sciences (Switzerland) 9(24). Mueller-vahl, Hanns, Georgios Pechlivanoglou, C N Nayeri, and C O Paschereit. 2012. “VORTEX GENERATORS FOR WIND TURBINE BLADES: A COMBINED WIND TUNNEL AND WIND TURBINE PARAMETRIC STUDY.” Proceedings of ASME Turbo Expo 2012 . Nair, Manu S., V. Arihant, D. Bhanu Priya, and Murali Subramaniyam. 2020. “Design and CFD Analysis of Horizontal Axis Wind Turbine Blade with Microtab.” IOP Conference Series: Materials Science and Engineering 912(2). Peng, H. Y., H. J. Liu, and J. H. Yang. 2021. “A Review on the Wake Aerodynamics of H-Rotor Vertical Axis Wind Turbines.” Energy 232: 121003. https://doi.org/10.1016/j.energy.2021.121003. Raciti Castelli, Marco, Alessandro Englaro, and Ernesto Benini. 2011. “The Darrieus Wind Turbine: Proposal for a New Performance Prediction Model Based on CFD.” Energy 36(8): 4919–34. http://dx.doi.org/10.1016/j.energy.2011.05.036. Sahu, Bikash Kumar. 2018. “Wind Energy Developments and Policies in China: A Short Review.” Renewable and Sustainable Energy Reviews 81(May 2017): 1393–1405. http://dx.doi.org/10.1016/j.rser.2017.05.183. Simão Ferreira, Carlos, Gijs Van Kuik, Gerard Van Bussel, and Fulvio Scarano. 2009. “Visualization by PIV of Dynamic Stall on a Vertical Axis Wind Turbine.” Experiments in Fluids 46(1): 97–108. Song, Chenguang et al. 2019. “Numerical Investigation on the Effects of Airfoil Leading Edge Radius on the Aerodynamic Performance of H-Rotor Darrieus Vertical Axis Wind Turbine.” Energies 12(19). Yashodhar V1, Humrutha G2, M Kaushik3, S A Khan*4. 2016. “CFD Studies on Triangular Micro -Vortex Generators in Flow Control.” Journal of Physics: Conference Series 755(1).