PSI - Issue 47

Mario A. Sánchez Miranda et al. / Procedia Structural Integrity 47 (2023) 310–324 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

322

13

An additional mention of gratitude to the University of Michoacan in Mexico for the received support in the development of this work.

References

[1] Thomas WM, Nicholas ED, Needham JC, Murch MG, Temple-Smith P, and Dawes ChJ (1991), Friction-stir butt welding, GB Patent No. 9125978.8, International patent application No. PCT/GB92/02203, , https://patents.google.com/patent/US5460317A/en. [2] J.K. Paik, Mechanical properties of friction stir welded aluminium alloys 5083 and 5383 Int. J. of Nav. Arch. and Ocean Eng. 2009 1(1), 39-49. [3] H. J. Liu, H.J. Zhang, L.Yu, Effect of welding speed on microstructures and mechanical properties of underwater friction stir welded 2219 aluminum alloy, Mat. and Desi . 2011 , 32, 1548-1553. [4] S. Benavides, Y. Li, L.E. Murr, D. Brown, and J.C. McClure, Low-temperature friction-stir welding of 2024 aluminum, Scrip. Mat. 1999 , 41(8), 809-815. [5] P. Cavaliere, Friction stir welding of Al alloys: analysis of processing parameters affecting mechanical behavior, Proce. CIRP , 2013 , 11:139-144. [6] M.R.M. Aliha et al., Mechanical and metallurgical properties of dissimilar AA6061-T6 and AA7277-T6 joint made by FSW technique, Int. J. Adv. Manuf. Tech . 2016 , 86: 2551 – 2565. [7] M. Sen, S. Shankar, S. Chattopadhyaya, Investigations into FSW joints of dissimilar aluminum alloys , Mat. Today. Procc , 2020 , 27(3), 2455-2462. [8] T. Chen, Process parameters study on FSW joint of dissimilar metals for aluminum-steel , J. of Mat. Sci . 2009 , 44(10), 2573-2580. [9] R, Rahbarpour, T. Azdast , H. Rahbarpour, S. M. Shishavan, Feasibility study of friction stir welding of wood – plastic composites , Sci. and Tech. of Weld and Join Sci. and Tech. of Weld and Join . 2014 , 19(8), 673-681. [10] C.B. Lin, L. Ch. Wu, Friction welding of similar and dissimilar materials: PMMA and PVC, Poly Eng. and Sci. 2000 , 40(8), 1931-1941. [11] J. Gao, Cha. Li, U. Shilpakar, Y. Shen, Improvements of mechanical properties in dissimilar joints of HDPE and ABS via carbon nanotubes during friction stir welding process, Mat. and Des. 2015 , 86, 289 296. [12] M.R. Hajideh, M. Farahani, S.A.D. Alavi, N.M. Ramezani, Investigation on the effects of tool geometry on the microstructure and the mechanical properties of dissimilar friction stir welded polyethylene and polypropylene sheets, J. of Manuf. Proc . 2017 , 26:269-279. [13] M. Hangshenas, F Khodabakhsi, Dissimilar friction-stir welding of aluminum and polymer: a review, Int J. of Adv. Mauf. Tech. 2019 , 104, 333-358. [14] Y. Huang, X. Meng, Y. Huang, Y. Xie, L. Zhou, Joining of aluminum alloy and polymer via friction stir lap welding, J. of Mat. Proc. Tech . 2018 , 257, 148-154. [15] W. Wang et al., Enhanced aluminum alloy-polymer friction stir welding joints by introducing micro textures, Mat. Lett . 2021 , 295, 129872. [16] F. Simões, D.M. Rodrigues, Material flow and thermo-mechanical conditions during Friction Stir Welding