PSI - Issue 47

G. Morettini et al. / Procedia Structural Integrity 47 (2023) 296–309 Author name / Structural Integrity Procedia 00 (2019) 000–000

308

13

Afrose, M.F., Masood, S.H., Iovenitti, P., Nikzad, M., Sbarski, I., 2016. Effects of part build orientations on fatigue behaviour of FDM-processed PLA material. Progr Additive Manuf. 1, 1-2. Ahmed, A.A., Susmel, L., 2017. Additively Manufactured PLA under static loading: strength/cracking behaviour vs. deposition angle. Procedia Struct Integrity 3, 498–507. Berto, F., Lazzarin, P., 2009. A review of the volume-based strain energy density approach applied to V-notches and welded structures. Theoretical and Applied Fracture Mechanics 52, 183–194. Berto, F., Zappalorto, M., 2011. Fictitious notch rounding concept applied to Vnotches with end holes under mode I loading. International journal of fracture 171. 91–98. Berto, F., Lazzarin, P., Ayatollahi, M.R, 2013. Recent developments in brittle and quasi-brittle failure assessment of graphite by means of SED approach. In Proceedings of the 13th International Conference on Fracture, Beijing, China, 3, 3216–21. Berto, F., Lazzarin, P., 2014. Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches. In: Materials Science and Engineering: R: Reports 75, 1–48. Chacon, J, Caminero, M., García-Plaza, E., Núnez, P., 2017. Additive manufacturing of PLA structures using fused deposition modelling: Effect of process parameters on mechanical properties and their optimal selection. Mater Des 124, 143–57. Corapi, D., Morettini, G., Pascoletti, G., Zitelli, C., 2019. Characterization of a polylactic acid (PLA) produced by fused deposition modeling (FDM) technology. Procedia Struct Integr 24. Es-Said O.S., Foyos, J., Noorani, R., Mendelson, M., Marloth, R., Pregger, B.A., 2000. Effect of Layer Orientation on Mechanical Properties of Rapid Prototyped Samples. Mater Manuf Processes 15, 107–22. Ezeh, O.H., Susmel, L., 2018. On the fatigue strength of 3D-printed polylactide (PLA). Procedia Struct Integrity 9, 29–36. Filippi, S., Lazzarin, P., Tovo, R., 2002. Developments of some explicit formulas useful to describe elastic stress fields ahead of notches in plates. International Journal of Solids and Structures 39, 4543–4565. Foti, P., et al., 2021. On the application of the volume free strain energy density method to blunt V-notches under mixed mode condition. Engineering Structures 230, 111-716. Gonzalez-Gutierrez, J., Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J., Holzer, C., 2018. Additive manufacturing of metallic and ceramic components by the material extrusion of highly-filled polymers: A review and future perspectives. Materials. Heinz, N., 2013. Kerbspannungslehre: Theorie der Spannungskonzentration Genaue Berechnung der Festigkeit. Springer-Verlag. Inernational ASTM, 2004. Standard Test Method for Poisson’s Ratio at Room Temperature. In: Annual Book of ASTM Standards 3. 132-04 Inernational ASTM, 2007. Standard test methods for plane-strain fracture toughness and strain energy release rate of plastic materials. In: ASTM 45-99. International ASTM, 2015. ASTM D638-14, Standard Test Method for Tensile Properties of Plastics. ASTM International,. Landi, L., Stecconi, A., Morettini, G., Cianetti, F., 2021. Analytical procedure for the optimization of plastic gear tooth root. Mech Mach Theory. https://doi.org/10.1016/j.mechmachtheory.2021. 104496 Lazzarin, P., Zambardi, R., 2001. A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V shaped notches. Int. J. Fract. 112, 275–298. Lazzarin, P., Berto, F., 2005. Some expressions for the strain energy in a finite volume surrounding the root of blunt V-notches. Int. J. Fract., 135, 161–185. McLouth, T. D., Severino, J. V., Adams, P.M., Patel, D.N., Zaldivar, R.J.,2017. The impact of print orientation and raster pattern on fracture toughness in additively manufactured ABS. Addit Manuf 18, 103–9. Mohamed, O.A., Masood, S.H., Bhowmik, J.L., 2015. Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Adv Manuf 3, 42–53. Morettini, G., Razavi, S.M.J, Zucca, G., 2019. Efects of build orientation on fatigue behavior of Ti-6Al-4V as-built specimens produced by direct metal laser sintering. Procedia Struct Integr 24, 349–359. https://doi.org/10.1016/j.prostr.2020.02.032 Morettini, G., Palmieri, M., Capponi, L., Landi, L., 2022. Comprehensive characterization of mechanical and physical properties of PLA structures printed by FFF-3D-printing process in different directions. Progress in Additive Manufacturing 7, 1111 – 1122. DOI: 10.1007/s40964-022-00285-8 Nyamekye, P., Golroudbary, S. R., Piili, H., Luukka, P., Kraslawski, A., 2023. Impact of additive manufacturing on titanium supply chain: Case of titanium alloys in automotive and aerospace industries. Advances in Industrial and Manufacturing Engineering. Palmieri, M., Zucca, G., Morettini, G., Landi, L., Cianetti, F., 2022. Vibration Fatigue of FDM 3D Printed Structures: The Use of Frequency Domain Approach. Materials 15, 854. Rossi, A., Morettini, G., Moretti, M., Capponi, L., 2022. Filament Transport Control for Enhancing Mechanical Properties of Parts Realised by Fused Filament Fabrication. Materials 15. Safai, L., Cuellar, J. S., Smit, G., Zadpoor, A.A., 2019. A review of the fatigue behavior of 3D printed polymers. Addit Manuf 28, 87–97. Sánchez, M., Cicero, S., Arrieta, S., Martínez, V., 2022. Fracture Load Predictions in Additively Manufactured ABS U-Notched Specimens Using Average Strain Energy Density Criteria. Materials, 15, 2372. https://doi.org/ 10.3390/ma15072372 Sheth, S., Taylor, R.M., 2017. Numerical Investigation of Stiffness Properties of FDM Parts as a Function of Raster Orientation. Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 9. Seibert, P., Razavi, J.S.M., Susmel, L., Berto, F., Kastner, M., 2020. Validation of the Averaged Strain Energy Density Criterion for Additively Manufactured Notched Polylactide Acid Specimens. Procedia Struct Integrity 28, 2099–103. Seibert, P., Susmel, L, Berto F., Kästner, M., Razavi, S.M.J., 2021. Applicability of strain energy density criterion for fracture prediction of notched PLA specimens produced via fused deposition modeling, Engineering Fracture Mechanics 258, 108103. https://doi.org/10.1016/j.engfracmech.2021.108103.