PSI - Issue 47

Alexander Ilyin et al. / Procedia Structural Integrity 47 (2023) 290–295 A. Ilyin and Y. Pronina / Structural Integrity Procedia 00 (2019) 000–000

295

6

Anguiano, M., Masud, A., Rajagopal, K. R., 2022. Mixture Model for Thermo-Chemo-Mechanical Processes in Fluid-Infused Solids. International Journal of Engineering Science 174. 103576. doi: 10.1016/j.ijengsci.2021.103576 Argatov, I.I., Chai, Y.S., 2020. Contact Geometry Adaptation in Fretting Wear: A Constructive Review. Frontiers in Mechanical Engineering 6,51 Argatov, I.I., Chai, Y.S., 2022. Optimal design of the functional grading in elastic wear-resisting bearings: a simple analytical model. International Journal of Mechanics and Materials in Design, 18(2), pp. 353–364 Audoly, B, and Pomeau, Y., 2010. Elasticity and Geometry: From Hair Curls to the Non-Linear Response of Shells. Oxford University Press. Butusova, Y. N., Mishakin, V. V., Kachanov, M., 2020. On Monitoring the Incubation Stage of Stress Corrosion Cracking in Steel by the Eddy Current Method. International Journal of Engineering Science 148, 103212 Dastjerdi,S., Akgöz,B., Civalek,Ö., Malikan,,M., Eremeyev,,V. A., 2020. On the Non-linear Dynamics of Torus-shaped and Cylindrical Shell Structures. International Journal of Engineering Science. 156, 103371. doi: 10.1016/j.ijengsci.2020.103371 Dean, W. R., 1939. XLII. The Distortion of a Curved Tube Due to Internal Pressure. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science 28, 452–64. Dolinskii, V. M., 1967. Calculations on Loaded Tubes Exposed to Corrosion. Chemical and Petroleum Engineering 3(2), 96–97 Groysman, A., 2017a. Physicochemical Basics of Corrosion at Refineries Units. Topics in Safety, Risk, Reliability and Quality, 32, pp. 17-36. Groysman, A., 2017b. Corrosion Problems and Solutions at Oil Refinery and Petrochemical Units. Topics in Safety, Risk, Reliability and Quality, 32, pp. 37-99. Gutman, E. M., 1994. Mechanochemistry of Solid Surfaces. World Scientific, Singapore. Gutman, E., Bergman, R., Levitsky, S., 2016. Influence of Internal Uniform Corrosion on Stability Loss of a Thin-Walled Spherical Shell Subjected to External Pressure. Corrosion Science 111, 212-215. doi:10.1016/j.corsci.2016.04.018. Javadi, M., Epstein, M., Asghari, M., 2020. Micromorphic Balance Equations in Mass Transport and Mass Production. International Journal of Engineering Science. 153, 103312 doi: 10.1016/j.ijengsci.2020.103312 Javanbakht, M., Ghaedi, M. S., 2020. Phase Field Approach for Void Dynamics with Interface Stresses at the Nanoscale. International Journal of Engineering Science. 154, 103279 doi: 10.1016/j.ijengsci.2020.103279 Jordan, P. F., 1962. Stresses and Deformations of the Thin-Walled Pressurized Torus. Journal of the Aerospace Sciences 29(2), 213–25. Kazemian, M., Hassani, A., Goudarzi, A. M., 2022. On Strain-Induced Degradation of the Polymeric Skeleton in Poro-Hyperelastic Inflating Vessels by a Non-Equilibrium Thermodynamic Framework. International Journal of Engineering Science. 171, 103618 doi: 10.1016/j.ijengsci.2021.103618 Kostyrko, S., Grekov, M., Altenbach, H., 2021. Coupled Effect of Curved Surface and Interface on Stress State of Wrinkled Thin Film Coating at the Nanoscale. ZAMM Zeitschrift Fur Angewandte Mathematik Und Mechanik, doi:10.1002/zamm.202000202 Kostyrko, S., Grekov, M., Altenbach, H., 2019. Stress Concentration Analysis of Nanosized Thin-Film Coating with Rough Interface. Continuum Mechanics and Thermodynamics, 31(6), 1863-1871. doi:10.1007/s00161-019-00780-4 Kydoniefs, A. D., Spencer A. J. M., 1967. The Finite Inflation of an Elastic Toroidal Membrane of Circular Cross Section. International Journal of Engineering Science 5(4), 367–91. Mróz, Z., Kucharski, S., Páczelt, I., 2018. Anisotropic Friction and Wear Rules with Account for Contact State Evolution. Wear, 396-397, 1-11. doi:10.1016/j.wear.2017.11.004 Okulova D, Almazova L., Sedova O., Pronina Y., 2023. On Local Strength of a Spherical Vessel with Pits Distributed along the Equator. Frattura ed Integrità Strutturale, 17 (63), 80-90. DOI: 10.3221/igf-esis.63.08 Pronina, Y., 2017. An Analytical Solution for the Mechanochemical Growth of an Elliptical Hole in an Elastic Plane under a Uniform Remote Load. European Journal of Mechanics-A/Solids 61, 357-363. doi:10.1016/j.euromechsol.2016.10.009. Pronina, Y .G., Sedova, O. S., 2021. Analytical Solution for the Lifetime of a Spherical Shell of Arbitrary Thickness under the Pressure of Corrosive Environments: The Effect of Thermal and Elastic Stresses. ASME Journal of Applied Mechanics, 88, 061004. doi: 10.1115/1.4050280. Pronina, Y., Sedova, O., Grekov, M., Sergeeva, T., 2018. On Corrosion of a Thin-Walled Spherical Vessel under Pressure. International Journal of Engineering Science 130, 115–28. Rossettos, J N., Sanders, J. L., 1965. Toroidal Shells under Internal Pressure in the Transition Range. AIAA Journal 3(10), 1901–9. Sanders, J. L., Liepins A. A., 1963. Toroidal Membrane under Internal Pressure. AIAA Journal 1(9):2105–10. Sedova, O. S., Pronina, Y. G., 2022. The Thermoelasticity Problem for Pressure Vessels with Protective Coatings, Operating under Conditions of Mechanochemical Corrosion, International Journal of Engineering Science 170, 103589. doi: 10.1016/j.ijengsci.2021.103589. Shuvalov, G. M., Kostyrko, S. A., 2021. Stability Analysis of a Nanopatterned Bimaterial Interface. Vestnik Sankt-Peterburgskogo Universiteta, Prikladnaya Matematika, Informatika, Protsessy Upravleniya, 17(1), 97-104. doi:10.21638/11701/SPBU10.2021.109 Song, Z., 2020. Analytical Study on Phase Transition of Shape Memory Alloy Wire under Uniaxial Tension. International Journal of Engineering Science 152, 103295 doi: 10.1016/j.ijengsci.2020.103295 Wee, W., Chudnovsky, A., Choi, B.-H., 2022. Modeling of multiple crack initiation in polymer pipes under oxidative environment. International Journal of Engineering Science 176, 103686. doi: 10.1016/j.ijengsci.2022.103686 Xia, X., Li, J., Zhang, J., Weng G. J., 2021. Uncovering the Glass-Transition Temperature and Temperature-Dependent Storage Modulus of Graphene-Polymer Nanocomposites through Irreversible Thermodynamic Processes. International Journal of Engineering Science 158,103411 doi: 10.1016/j.ijengsci.2020.103411 Zhao S., Pronina Y., 2019. On the Stress State of a Pressurised Pipe with an Initial Thickness Variation, Subjected to Non-Homogeneous Internal Corrosion // E3S Web of Conferences 2019. Vol. 121, N 01013. doi: 10.1051/e3sconf/201912101013