PSI - Issue 47

L.A. Almazova et al. / Procedia Structural Integrity 47 (2023) 417–425 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

424

8

Budiansky, N. D., Organ, L., Hudson, J. L. & Scully, J. R. Detection of interactions among localized pitting sites on stainless steel using spatial statistics. J. Electrochem. Soc. 152, B152–B160 (2005).; Butusova, Y. N., Mishakin, V. V., Kachanov, M., 2020. On Monitoring the Incubation Stage of Stress Corrosion Cracking in Steel by the Eddy Current Method. International Journal of Engineering Science 148, 103212 Cerit, M. (2013). Numerical investigation on torsional stress concentration factor at the semi elliptical corrosion pit, Corros. Sci., 67, pp. 225–232. DOI: 10.1016/j.corsci.2012.10.028. Ghahari, M., Krouse, D., Laycock, N., Rayment, T., Padovani, C., Stampanoni, M., F. Marone, R. Mokso, Davenport, A. J. (2015). Synchrotron X ray radiography studies of pitting corrosion of stainless steel: Extraction of pit propagation parameters. Corrosion Science, 100, 23–35. doi:10.1016/j.corsci.2015.06.023 Gutman, E.M., Bergman, R.M., and Levitsky, S.P. (2016). Influence of internal uniform corrosion on stability loss of a thin-walled spherical shell subjected to external pressure, Corros. Sci., 111, pp. 212–215. DOI: 10.1016/j.corsci.2016.04.018. Heurtault S. ab, Raphaël Robin a, Fabien Rouillard *a and Vincent Vivier DOI: 10.1039/C4FD00252K (Paper) Faraday Discuss., 2015, 180, 267 282 Initiation and propagation of a single pit on stainless steel using a local probe technique Javadi, M., Epstein, M., Asghari, M., 2020. Micromorphic Balance Equations in Mass Transport and Mass Production. International Journal of Engineering Science. 153, 103312 doi: 10.1016/j.ijengsci.2020.103312 Javanbakht, M., Ghaedi, M. S., 2020. Phase Field Approach for Void Dynamics with Interface Stresses at the Nanoscale. International Journal of Engineering Science. 154, 103279 doi: 10.1016/j.ijengsci.2020.103279 Kazemian, M., Hassani, A., Goudarzi, A. M., 2022. On Strain-Induced Degradation of the Polymeric Skeleton in Poro-Hyperelastic Inflating Vessels by a Non-Equilibrium Thermodynamic Framework. International Journal of Engineering Science. 171, 103618 doi: 10.1016/j.ijengsci.2021.103618 Kostyrko, S., Grekov, M., Altenbach, H., 2021. Coupled Effect of Curved Surface and Interface on Stress State of Wrinkled Thin Film Coating at the Nanoscale. ZAMM Zeitschrift Fur Angewandte Mathematik Und Mechanik, doi:10.1002/zamm.202000202 Lakhdari, A.A., Bubnov, S.A., Seddak, A., Ovchinnikov, I.I., and Ovchinnikov, I.G. (2020). Finite Element Modeling of the behavior of a hollow cylinder in a hydrogen-containing environment, Frattura ed Integrità Strutturale, 51, pp. 236–253. DOI: 10.3221/IGF-ESIS.51.19. Laycock, N., White, S. & Krouse, D. Numerical simulation of pitting corrosion: interactions between pits in potentiostatic conditions. ECS Trans. 1, 37–45 (2006) Laycock, N. J., Krouse, D. P., Hendy, S. C. & Williams, D. E. Computer simulation of pitting corrosion of stainless steels. Electrochem. Soc. Interface 23, 65–71 (2014). Liao, Y., Liu, C., Wang, T., Xu, T., Zhang, J., and Ge, L. (2021). Mechanical behavior analysis of gas pipeline with defects under lateral landslide. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 235(23), pp. 6752–6766. DOI: 10.1177/09544062211017161. Liu, C., Li, X., Revilla, R. I., Sun, T., Zhao, J., Zhang, D., Yang, S., Liu, Z., Cheng, X., Terryn, H., and Li, X. (2021). Towards a better understanding of localised corrosion induced by typical non-metallic inclusions in low-alloy steels, Corros. Sci., 179, 109150. DOI: 10.1016/j.corsci.2020.109150. Liu Xuefeng et al 2021 Simulation of pit interactions of multi-pit corrosion under an anticorrosive coating with a three-dimensional cellular automata model // Modelling and Simulation in Materials Science and Engineering, Volume 29, Number 6 Modelling Simul. Mater. Sci. Eng. 29 065018 DOI 10.1088/1361-651X/ac13cb Mechab, B., Malika, M., Salem, M., and Boualem, S. (2020). Probabilistic elastic-plastic fracture mechanics analysis of propagation of cracks in pipes under internal pressure, Frattura ed Integrità Strutturale, 14(54), pp. 202–210. DOI: 10.3221/IGF-ESIS.54.15. Okulova D, Almazova L., Sedova O., Pronina Y., 2023. On Local Strength of a Spherical Vessel with Pits Distributed along the Equator. Frattura ed Integrità Strutturale, 17 (63), 80-90. DOI: 10.3221/igf-esis.63.08 Pronina, Y., 2017. An Analytical Solution for the Mechanochemical Growth of an Elliptical Hole in an Elastic Plane under a Uniform Remote Load. European Journal of Mechanics-A/Solids 61, 357-363. doi:10.1016/j.euromechsol.2016.10.009. Pronina, Y., Maksimov, A., Kachanov, M., 2020. Crack Approaching a Domain Having the Same Elastic Properties But Different Fracture Toughness: Crack Deflection Vs Penetration. International Journal of Engineering Science 156, 103374. https://doi.org/10.1016/j.ijengsci.2020.103374. Pronina, Y.G. (2013). Lifetime assessment for an ideal elastoplastic thick-walled spherical member under general mechanochemical corrosion conditions, In: COMPLAS XII: Proceedings of the XII International Conference on Computational Plasticity: Fundamentals and Applications, CIMNE, pp. 729–738. Pronina, Y., Sedova, O., Grekov, M., and Sergeeva, T. (2018). On corrosion of a thin-walled spherical vessel under pressure, Int. J. Eng. Sci., 130, pp. 115–128. DOI: 10.1016/j.ijengsci.2018.05.004. Pronina, Y., and Sedova, O. (2021). Analytical solution for the lifetime of a spherical shell of arbitrary thickness under the pressure of corrosive environments: The effect of thermal and elastic stresses, J. Appl. Mech.-T. ASME, 88, 061004. DOI: 10.1115/1.4050280. Sedova, O., and Pronina, Y. (2022). The thermoelasticity problem for pressure vessels with protective coatings, operating under conditions of mechanochemical corrosion, Int. J. Eng. Sci., 170, 103589. DOI: 10.1016/j.ijengsci.2021.103589. Sedova, O., Pronina, Y., 2015. Taking account of hydrostatic pressure in the modeling of corrosion of thick spherical shells, in: 2015 International Conference on Mechanics - Seventh Polyakhov’s Reading, pp. 1–4. doi:10.1109/POLYAKHOV.2015.7106771. Sedova, O.S., Khaknazarova, L.A., and Pronina, Y.G. (2014). Stress concentration near the corrosion pit on the outer surface of a thick spherical member, In: IEEE 10th International Vacuum Electron Sources Conference, IVESC 2014, pp. 245–246. DOI: 10.1109/IVESC.2014.6892074. Shuvalov, G. M., Kostyrko, S. A., 2021. Stability Analysis of a Nanopatterned Bimaterial Interface. Vestnik Sankt-Peterburgskogo Universiteta, Prikladnaya Matematika, Informatika, Protsessy Upravleniya, 17(1), 97-104. doi:10.21638/11701/SPBU10.2021.109