Issue 44

P.S. Valvo, Frattura ed Integrità Strutturale, 44 (2018) 123-139; DOI: 10.3221/IGF-ESIS.44.10

[65] Raghu Prasad, B.K. and Pavan Kumar, D.V.T.G., (2008). Analysis of composite ENF specimen using higher order beam theories, Thin Wall. Struct., 46, pp. 676–688. DOI: 10.1016/j.tws.2007.11.004. [66] Reeder, J.R. and Crews Jr, J.H., (1992). Redesign of the mixed-mode bending delamination test to reduce nonlinear effects, J. Compos. Tech. Res., 14, pp. 12–19. DOI: 10.1520/CTR10078J. [67] Ducept, F., Davies, P. and Gamby, D., (1997). An experimental study to validate tests used to determine mixed mode failure criteria of glass/epoxy composites, Compos. Part A-Appl. S., 28, pp. 719–729. DOI: 10.1016/S1359-835X(97)00012-2. [68] Beghini, M., Bertini, L. and Forte, P., (2006). Experimental investigation on the influence of crack front to fiber orientation on fatigue delamination growth rate under mode II, Compos. Sci. Technol., 66, pp. 240–247. DOI: 10.1016/j.compscitech.2005.04.033. [69] Davies, P., Sims, G.D., Blackman, B.R.K., Brunner, A.J., Kageyama, K., Hojo, M., Tanaka, K., Murri, G., Rousseau, C., Gieseke, B. and Martin, R.H., (1999). Comparison of test configurations for determination of mode II interlaminar fracture toughness results from international collaborative test programme, Plast. Rubber Compos., 28, pp. 432–437. DOI: 10.1179/146580199101540600. [70] Agrawal, A. and Ben Jar, P.-Y., (2003). Analysis of specimen thickness effect on interlaminar fracture toughness of fibre composites using finite element models, Compos. Sci. Technol., 63, pp. 1393–1402. DOI: 10.1016/S0266-3538(03)00088-5. [71] Theotokoglou, E.E. and Vrettos, C.D., (2006). A finite element analysis of angle-ply laminate end-notched flexure specimens, Compos. Struct., 73, pp. 370–379. DOI: 10.1016/j.compstruct.2005.02.010. [72] Irwin, G.R. and Kies, J.A., (1954). Critical energy release rate analysis of fracture strength. Weld. J. Res. Suppl., 33, pp. 193–198. [73] van der Meer, F.P. and Sluys, L.J., (2009). A phantom node formulation with mixed mode cohesive law for splitting in laminates, Int. J. Fract., 158, pp. 107–124. DOI: 10.1007/s10704-009-9344-5. [74] Thouless, M.D., (2009). The effects of transverse shear on the delamination of edge-notch flexure and 3-point bend geometries, Compos. Part B-Eng., 40, pp. 305–312. DOI: 10.1016/j.compositesb.2009.01.005. [75] Wang, F., Shao, Z. and Wu, Y., (2013). Mode II interlaminar fracture properties of Moso bamboo, Compos. Part B- Eng., 44, pp. 242–247. DOI: 10.1016/j.compositesb.2012.05.035. [76] Liu, P.F., Gu, Z.P. and Peng, X.Q., (2016). A nonlinear cohesive/friction coupled model for shear induced delamination of adhesive composite joint, Int. J. Fract., 199, pp. 135–156. DOI: 10.1007/s10704-016-0100-3. [77] Li, Y., Stapleton, S.E., Simon, J.-W. and Reese, S., (2016). Experimental and Numerical Study of Paperboard Interface Properties, Exp. Mech., 56, pp. 1477–1488. DOI: 10.1007/s11340-016-0184-8. [78] Valvo, P.S., (2008). Does shear deformability influence the mode II delamination of laminated beams?, in: J. Pokluda, P. Lukáš, P. Šandera, I. Dlouhý (Eds.), 17th European Conference on Fracture: Multilevel approach to fracture of materials, components and structures, European Structural Integrity Society (ESIS), Brno, pp. 1470–1477. [79] Sundararaman, V. and Davidson, B., (1998). An unsymmetric end-notched flexure test for interfacial fracture toughness determination, Eng. Fract. Mech., 60, pp. 361–377. DOI: 10.1016/S0013-7944(98)00017-4. [80] Yang, Z. and Sun, C.T., (2000). Interlaminar Fracture Toughness of a Graphite/Epoxy Multidirectional Composite, J. Eng. Mater. Technol., 122, pp. 428–433. DOI: 10.1115/1.1289027. [81] Samborski, S., (2017). Analysis of the end-notched flexure test configuration applicability for mechanically coupled fiber reinforced composite laminates, Compos. Struct., 163, pp. 342-349. DOI: 10.1016/j.compstruct.2016.12.051. [82] Bieniaś, J., Dadej, K. and Surowska, B., (2017). Interlaminar fracture toughness of glass and carbon reinforced multidirectional fiber metal laminates, Eng. Fract. Mech., 175, pp. 127-145. DOI: 10.1016/j.engfracmech.2017.02.007. [83] ASTM D6671/D6671M-13e1, Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites, ASTM International, West Conshohocken, (2013). DOI: 10.1520/D6671_D6671M-13E01.

139