| Cover | 1 |
| TOC | 3 |
| ICF announces winners of 2017 ICF medals | 11 |
| M. A. Meggiolaro, J. T. Pinho de Castro, H. Wu - A two-step multiaxial racetrack filter algorithm for non-proportional load histories | 17 |
| G. Meneghetti, A. Campagnolo, F. Berto, K. Tanaka - Crack initiation life in notched Ti-6Al-4V titanium bars under uniaxial and multiaxial fatigue: synthesis based on the averaged strain energy density approach | 24 |
| M. Sakane, T. Itoh - Cracking directions in multiaxial low cycle fatigue at high and room temperatures | 32 |
| M. Kurek, T. Łagoda - Determination of the critical plane orientation depending on the fatigue curves for bending and torsion | 40 |
| V. Shlyannikov, R. Yarullin, I. Ishtyryakov - Effect of different environmental conditions on surface crack growth in aluminum alloys | 47 |
| A. Carpinteri, A. Spagnoli, S. Vantadori - Effect of spectral cross-correlation on multiaxial fatigue damage: simulations using the critical plane approach | 56 |
| T. Morishita, F. Ogawa, T. Itoh - Evaluation and visualization of multiaxial fatigue behavior under random non-proportional loading condition | 61 |
| A. S. Cruces, P. Lopez-Crespo, B. Moreno, A. Lopez-Moreno, S. Suman - Evaluation of new multiaxial damage parameters on low carbon steel | 70 |
| J. Toribio, J.C. Matos, B. González - Influence of crack micro-roughness on the plasticity-induced fatigue propagation in high strength steel | 78 |
| A. Carpinteri, G. Fortese, C. Ronchei, D. Scorza, S. Vantadori, F. Berto - Joined application of a multiaxial critical plane criterion and a strain energy density criterion in low-cycle fatigue | 82 |
| T. Morishita, Y. Takada, T. Itoh - Multiaxial fatigue property of type 316 stainless steel using hollow cylinder specimen under combined pull loading and inner pressure | 87 |
| F. Berto, A. Campagnolo, T. Welo, S. Vantadori, A. Carpinteri - Multiaxial fatigue strength of titanium alloys | 95 |
| M.V.C Sá, J.L.A Ferreira, C.R.M da Silva, J.A. Araújo - Notched multiaxial fatigue of Al7050-T7451: on the need for an equivalent process zone size | 106 |
| M. A. Meggiolaro, J. T. Pinho de Castro, S. E. Ferreira, H. Wu - On the applicability of Miner’s rule for multiaxial fatigue life calculations under non-proportional load histories | 114 |
| J.V. Sahadi, D. Nowell, R.J.H. Paynter - Prediction of fatigue crack initiation under biaxial loading | 122 |
| M. Vormwald, E. Shams - Sharp three-dimensional notches under combined nominal normal and shear fatigue loading | 130 |
| K. Slámečka, J. Pokluda - Simple criterion for predicting fatigue life under combined bending and torsion loading | 139 |
| S. E. Ferreira, J. T. Pinho de Castro, M. A. Meggiolaro - A model to quantify fatigue crack growth by cyclic damage accumulation calculated by strip-yield procedures | 145 |
| J. Toribio, B. González, J.C. Matos - Crack tip field in circumferentially-cracked round bar (CCRB) in tension affected by loss of axial symmetry | 155 |
| D.-Q. Wang, M.-L. Zhu, F.-Z. Xuan, J. Tong - Crack tip strain evolution and crack closure during overload of a growing fatigue crack | 159 |
| F.V. Antunes, R. Simões, R. Branco, P. Prates - Effect of numerical parameters on plastic CTOD | 165 |
| J.M. Vasco-Olmo, F.A. Díaz, F.V. Antunes, M.N. James - Experimental evaluation of CTOD in constant amplitude fatigue crack growth from crack tip displacement fields | 173 |
| .M. Vasco-Olmo, F.A. Díaz, M.N. James, C.J. Christopher, E.A. Patterson - Experimental methodology for the quantification of crack tip plastic zone and shape from the analysis of displacement fields | 182 |
| A. Carpinteri, A. Spagnoli, M. Terzano, S. Vantadori - Fracture toughness of rough and frictional cracks emanating from a re-entrant corner | 191 |
| J. Klon, J. Sobek, L. Malíková, S. Seitl - Impact of specific fracture energy investigated in front of the crack tip of three-point bending specimen | 199 |
| P. Lorenzino, J.-Y. Buffiere, C. Verdu - Influence of forging conditions on the fatigue mechanisms of low alloy steels: a 3D study | 207 |
| D. Nowell, K.I. Dragnevski, S.J. O’Connor - Measurement and analysis of fatigue crack deformation at the micro-scale | 213 |
| P. Lopez-Crespo, J. Vazquez-Peralta, C. Simpson, T. Buslaps, P. J. Withers - Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel | 219 |
| H. Šimonová, M. Vyhlídal, B. Kucharczyková, P. Bayer, Z. Keršner, L. Malíková, J. Klusák - Modelling of interfacial transition zone effect on resistance to crack propagation in fine-grained cement-based composites | 227 |
| Y. Nadot, D. Halm, F. Dal Cero Coelho - Gradient approach for the evaluation of the fatigue limit of welded structures under complex loading | 236 |
| J. A. O. González, J. T. P. de Castro, G. L. G. Gonzáles, M. A. Meggiolaro, J. L. F. Freire On DIC measurements of Keff to verify if it is the FCG driving force | 243 |
| V. M. Machado, J. T. P. de Castro, M. A. Meggiolaro - On short cracks that depart from elastoplastic notch tips | 252 |
| T. Vojtek, S. Žák, J. Pokluda - On the connection between mode II and mode III effective thresholds in metals | 261 |
| A. A. Ahmed, L. Susmel - On the use of length scale parameters to assess the static strength of notched 3D-printed PLA | 268 |
| F. Berto, M.R. Ayatollahi, S. Vantatori, A. Carpinteri - Review of the Influence of non-singular higher order terms on the stress field of thin welded lap joints and small inclined cracks in plates | 276 |
| S. Beretta, L. Patriarca, S. Rabbolini - Stress Intensity Factor calculation from displacement fields | 285 |
| L. Patriarca, P.G. Luccarelli, S. Foletti - Study of strain localizations in a polycrystalline medium in presence of a quasi-static crack | 293 |
| V. Shlyannikov, A. Tumanov - The effect of creep damage formulation on crack tip fields, creep stress intensity factor and crack growth assessments | 301 |
| A.S. Chernyatin, Yu.G. Matvienko, I.A. Razumovsky - The effect of residual stress on the nonsingular T-stresses | 309 |
| G. Meneghetti, M. Ricotta - The heat energy dissipated in a control volume to correlate the crack propagation rate in stainless steel specimens | 315 |
| A. Cernescu - The influence of crack tip shielding on fatigue crack propagation | 323 |
| M. Vormwald, Y. Hos, J. L.F. Freire, G.L.G. Gonzáles, J.G. Díaz - Variable mode-mixity during fatigue cycles – crack tip parameters determined from displacement fields measured by digital image correlation | 330 |
| S. Seitl, L. Malíková, J. Sobek, P. Frantík, P. Lopez-Crespo - Williams expansion-based approximation of the stress field in an Al 2024 body with a crack from optical measurements | 339 |
| G. G. de Cunto, A. H. Paes de Andrade, W. A. Monteiro - Application of Leak-Before-Break concept in 316LN austenitic steel pipes welded using 316L | 348 |
| Y. Yang, J. Zheng, S. Lv - Research on differences and correlation between tensile, compression and flexural moduli of cement stabilized macadam | 355 |
| R. M. De Salvo - An original method of direct calculation for the identification of the last hinge and the definition of the deformative state at collapse | 366 |
| L. Zhang, S. Li, Q. Yan, L. Zhu - Study on the effect of new type liquid accelerator on the performance of shotcrete | 372 |
| E. Nurullaev, A. S. Ermilov, N. Yu. Lyubimova - Dependence of mechanical characteristics from composition and structure and optimization of mechanical fracture energy of polymer composite material based on high-molecular rubbers | 385 |
| Z. Li, Z. Zhao - Residual welding stress of I-section members beyond the limits of width-thickness ratio | 394 |
| X. Wu, L. Dai - Carbon nano-tubes in improving the mechanical property of cement-based composite materials | 404 |
| C. F. Markides, S. K. Kourkoulis - Parametric study of the deformation of transversely isotropic discs under diametral compression | 412 |
| S. Zhao, L. Chen, Y. Fu - An experimental study on mechanical properties of fiber-reinforced concrete of energy piles | 428 |
| S. Doddamani, M. Kaleemulla - Fracture toughness investigations of Al6061-Graphite particulate composite using compact specimens | 440 |
| V. Rizov - Analysis of longitudinal cracked two-dimensional functionally graded beams exhibiting material non-linearity | 447 |
| A. Mardalizad, R. Scazzosi, A. Manes, M. Giglio - Four-point bending test on a middle strength rock: numerical and experimental investigations | 460 |
| M. F. Funari, F. Greco, P. Lonetti - Dynamic debonding in layered structures: a coupledALE-cohesive approach | 480 |
| S. K. Kourkoulis, I. Dakanali, E. D. Pasiou, I. Stavrakas, D. Triantis - Acoustic Emissions versus Pressure Stimulated Currents during bending of restored marble epistyles: Preliminary results | 492 |
| E. Tolmacheva (Lyapunova), M. Davydova, V. Chudinov, S. Uvarov, D. Zaytsev, P. Panfilov, O. Naimark - Regularities of fracture pattern formation in alumina ceramics subjected to dynamic indentation | 508 |
| 1 |