PSI - Issue 42

Md Shafiqul Islam et al. / Procedia Structural Integrity 42 (2022) 745 – 754 Md Shafiqul Islam et al. / Structural Integrity Procedia 00 (2019) 000–000

754

10

Basaran, M., Weichert, D., 2011. Stress state dependent damage modeling with a focus on the lode angle influence. PhD Thesis, RWTH Aachen. Bridgman, P. W., 2013. Studies in large plastic flow and fracture. In Studies in Large Plastic Flow and Fracture. Harvard University Press. Chen, F., Gatea, S., Ou, H., Lu, B., Long, H., 2016. Fracture characteristics of PEEK at various stress triaxialities. journal of the mechanical behavior of biomedical materials, 64, 173-186. Fujiyama, M., Awaya, H., Kimura, S., 1977. Mechanical anisotropy in injectionmolded polypropylene. Journal of Applied Polymer Science, 21(12), 3291-3309. G’sell, C., Aly-Helal, N. A., Jonas, J. J., 1983. E ff ect of stress triaxiality on neck propagation during the tensile stretching of solid polymers. Journal of Materials Science, 18(6), 1731-1742. Hora, P., Berisha, B., Gorji, M., Manopulo, N., 2012. A generalized approach for the prediction of necking and rupture phenomena in the sheet metal forming. IDDRG12, 79-93. Isight and the SIMULIA Execution Engine, 2020. Process automation and design exploration. Dassault Systmes, SIMULIA Corp., Providence, USA. Islam, M. S., 2019. Fracture and delamination in packaging materials: A study of experimental methods and simulation techniques. PhD Thesis, Blekinge Tekniska Hgskola. Kroon, M., Andreasson, E., Persson Jutemar, E., Petersson, V., Persson, L., Dorn, M., Olsson, P. A., 2018. Anisotropic elastic-viscoplastic properties at finite strains of injection-moulded low-density polyethylene. Experimental mechanics, 58(1), 75-86. Martnez-Donaire, A. J., Garca-Lomas, F. J., Vallellano, C., 2014. New approaches to detect the onset of localised necking in sheets under through thickness strain gradients. Materials and Design, 57, 135-145. Ognedal, A. S., Clausen, A. H., Dahlen, A., Hopperstad, O. S., 2014. Behavior of PVC and HDPE under highly triaxial stress states: An experimental and numerical study. Mechanics of Materials, 72, 94-108. Olufsen, S., Clausen, A. H., Hopperstad, O. S., 2019. Influence of stress triaxiality and strain rate on stress-strain behaviour and dilation of mineral filled PVC. Polymer Testing, 75, 350-357. Prez Caro, L., Schill, M., Haller, K., Odenberger, E. L. Oldenburg, M., 2020. Damage and fracture during sheet-metal forming of alloy 718. International Journal of Material Forming, 13(1), 15-28. Rickhey, F., Hong, S., 2022. Stress Triaxiality in Anisotropic Metal Sheets–Definition and Experimental Acquisition for Numerical Damage Pre diction. Materials, 15(11), 3738. Selini, N., Elmeguenni, M., Benguediab, M., 2013. E ff ect of the Triaxiality in Plane Stress Conditions. Triaxiality E ff ect in a PVC Material. Engineering, Technology and Applied Science Research, 3(1), 373-380. Sigvant, M., Mattiasson, K., Larsson, M., 2008. The definition of incipient necking and its impact on experimentally or theoretically determined forming limit curves, IDDRG 2008 Conference. Olofstrm, Sweden, 207-218. Wahlstro¨m, I., 2018. Fracture mechanics and damage modeling of injection molded high density polyethylene. ISRN LUTFD2 / TFHF-18 / 5228-SE (1-84).