PSI - Issue 42

Mohamed M.A. Ammar et al. / Procedia Structural Integrity 42 (2022) 1328–1335 Mohamed Ammar / Structural Integrity Procedia 00 (2019) 000–000

1335

8

References

Alimardani, M., Toyserkani, E., Huissoon, J.P., Paul, C.P., 2009. On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental-numerical investigation. Optics and Lasers in Engineering 47. doi: 10.1016/j.optlaseng. 2009.06.010 . Ammar, M.M., Shirinzadeh, B., 2022a. The Role of Compaction Roller in Defining the Layup Quality and Laminate Porosity in Robotic Fiber Placement , 1–6doi: 10.1109/ICMT53429.2021.9687161 . Ammar, M.M., Shirinzadeh, B., Lai, K.Z., Wei, W., 2021a. On the Sensing and Calibration of Residual Stresses Measurements in the Incremental Hole-Drilling Method. Sensors 2021, Vol. 21, Page 7447 21, 7447. doi: 10.3390/s21227447 . Ammar, M.M., Shirinzadeh, B., Zhao, P., Shi, Y., 2022. Optimization of process-induced residual stresses in automated manufacturing of thermoset composites. Aerospace Science and Technology 123, 107443. doi: 10.1016/J.AST.2022.107443 . Ammar, M.M.A., Shirinzadeh, B., 2022b. Evaluation of robotic fiber placement e ff ect on process-induced residual stresses using incremental hole-drilling method. Polymer Composites doi: 10.1002/PC.26702 . Ammar, M.M.A., Shirinzadeh, B., Zhao, P., Shi, Y., 2020. Developing a Trajectory Planning for Curved-Contoured Surfaces for Use by 8-DoF Workcell in Robotic Fibre Placement, in: IOP Conference Series: Materials Science and Engineering, IOP Publishing. p. 12018. doi: 10.1088/ 1757-899x/859/1/012018 . Ammar, M.M.A., Shirinzadeh, B., Zhao, P., Shi, Y., 2021b. An approach for damage initiation and propagation in metal and carbon fiber hybrid composites manufactured by robotic fiber placement. Composite Structures 268, 113976. doi: 10.1016/j.compstruct.2021.113976 . Bajaj, N., Chhabra, R., Sharma, R., Gupta, N., Vipin, V., 2020. E ff ect of ply orientation angle on residual stress in carbon fibre laminates. IOP Conference Series: Materials Science and Engineering 804, 012017. doi: 10.1088/1757-899X/804/1/012017 . Daniel, I.M., Liber, T., 1977. E ff ect of laminate construction on residual stresses in graphite / polyimide composites. Experimental Mechanics 1977 17:1 17, 21–25. doi: 10.1007/BF02324267 . De Gracia, J., Boyano, A., Arrese, A., Mujika, F., 2018. Analysis of the DCB test of angle-ply laminates including residual stresses. Theoretical and Applied Fracture Mechanics 94, 197–204. doi: 10.1016/J.TAFMEC.2017.03.010 . El-Gizawy, A.S., Kuan, Y.D., 2003. Modeling part warpage and residual stresses in resin transfer molding of composites. Journal of Manufacturing Processes 5, 40–45. doi: 10.1016/s1526-6125(03)70039-5 . Gurova, T., Gomes, L.S., Peripolli, S.B., Chavez, G.F.S., Estefen, S.F., Leontiev, A., 2019. Misorientation changes and residual stresses redistribu tion after welding. A physical simulation. Materials Research 22. doi: 10.1590/1980-5373-MR-2019-0360 . Kaddour, A.S., Al-Hassani, S.T., Hinton, M.J., 2003. Residual stress assessment in thin angle ply tubes. Applied Composite Materials 10. doi: 10.1023/A:1023990507666 . Karakuzu, R., Aslan, Z., Okutan, B., 2004. The e ff ect of ply number, orientation angle and bonding type on residual stresses of woven steel fiber reinforced thermoplastic laminated composite plates subjected to transverse uniform load. Composites Science and Technology 64. doi: 10.1016/j.compscitech.2003.09.014 . Lubineau, G., 2008. Estimation of residual stresses in laminated composites using field measurements on a cracked sample. Composites Science and Technology 68. doi: 10.1016/j.compscitech.2008.06.009 . Pagliaro, P., Zuccarello, B., 2007. Residual stress analysis of orthotropic materials by the through-hole drilling method. Experimental Mechanics 47. doi: 10.1007/s11340-006-9019-3 . Salmi, A., Piscopo, G., Atzeni, E., Minetola, P., Iuliano, L., 2018. On the E ff ect of Part Orientation on Stress Distribution in AlSi10Mg Specimens Fabricated by Laser Powder Bed Fusion (L-PBF), in: Procedia CIRP. doi: 10.1016/j.procir.2017.12.198 . Serra, Y., Ficquet, X., Kingston, E., 2014. Residual Stress Measurement Using the Hole Drilling Technique on Components outside the ASTM E837 Standard. Advanced Materials Research 996, 301–306. doi: 10.4028/www.scientific.net/AMR.996.301 . Vrancken, B., Cain, V., Knutsen, R., Van Humbeeck, J., 2014. Residual stress via the contour method in compact tension specimens produced via selective laser melting. Scripta Materialia 87. doi: 10.1016/j.scriptamat.2014.05.016 .