PSI - Issue 42

Michal Vyhlídal et al. / Procedia Structural Integrity 42 (2022) 1000–1007 Author name / Structural Integrity Procedia 00 (2019) 000 – 000

1007

8

Fig. 8. Evolution of the critical applied force F crit for the crack propagation stages in dependence on the distance d.

Acknowledgements This outcome has been achieved with the financial support of the Brno University of Technology under project No. FAST-J-22-8038. Authors are grateful for support from the Czech Science Foundations, project No. 21-08772S. References Anderson, T. L., 2005. Fracture mechanics: fundamentals and applications (3rd ed). CRC Press, Boca Raton, FL, pp. 630. ANSYS, Inc. ANSYS 2021 R2 Users Guide. Swanson Analysis System, Houston, 2021. Cornetti P., Pugno N., Carpinteri A., Taylor D., 2006. Finite fracture mechanics: a coupled stress and energy failure criterion. Eng. Fract. Mech. 73, 2021–33. De Corte, W., Helincks, P., Boel, V., Klusák, J., Seitl, S., De Schutter, G. 2017. Generalised fracture mechanics approach to the interfacial failure analysis of a bonded steel-concrete joint, Frattura ed Integrita Strutturale 42, 147-160. Diamond, S., Huang, J., 1998. Interfacial Transition Zone: Reality or Myth? In: The Interfacial Transition Zone in Cementitious Composites . E&FN Spon, London, pp. 3-39. EN 1992-1-1. Eurocode 2: Design of concrete structures: Part 1-1: General rules and rules for buildings . 2. Brussel: European Committee for Standardization, 2011. Erdogan, F., Sih, G. C., 1963. On the Crack Extension in Plates Under Plane Loading and Transverse Shear. Journal of Basic Eng. 85, 519–525. Farran , J., 1956. Contribution mineralogique a l’etude de l’adherence entre les constituants hydrates des ciments et les materiaux enrobes. Revue des Matiriaux de Construction 491, 155 – 157. Irwin, G., 1957. Analysis of Stresses and Strains near the End of a Crack Traversing a Plate. Journal of Applied Mechanics 24, 361–364. Klusák, J., Profant, T., Kotoul, M., 2008. A comparison of two direct methods of generalized stress intensity factor calculat ions of bi-material notches, Key Eng. Mater. 385–387, 409–412. Klusák, J., Profant, T., Knésl, Z., Kotoul, M. 2013. The influence of discontinuity and orthotropy of fracture toughness on conditions of fracture initiation in singular stress concentrators, Engineering Fracture Mechanics, 110, 438-447. Klusák, J., Krepl, O., Profant, T., 2016. Behaviour of a crack in a corner or at a tip of a polygon-like particle, Proc. Struct. Integ., 1912-1919. Ping, X.C., Chen, M.C., Xie, J.L., 2008. Singular stress analyses of V-notched anisotropic plates based on a novel finite element method. Eng. Fract. Mech. 75, 3819–3838 Profant, T., Ševeček, O., Kotoul, M., 2008. Calculation of K -factor and T-stress for cracks in anisotropic bimaterials, Eng. Fract. Mech. 75, 3707– 26. Scrivener, K. L., Crumbie, A. K., Laugesen, P., 2004. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete. Interface Science 12(4), 411 – 421. Taylor, D., Cornetti, P., Pugno, N., 2005: The fracture mechanics of finite crack extension Engineering Fracture Mechanics, 72, 1021-1038. Taylor, D., 2017: The Theory of Critical Distances: A link to micromechanisms, Theoretical and Applied Fracture Mechanics, 90, 228-233. Vyhlídal, M., Klusák, J., 2019 The influence of polygonal cavity on fracture behaviour of concrete. Procedia Structural Integrity . 690–697. Vyhlídal, M., Rozsypalová, I., Majda, T., Daněk, P., Šimonová, H., Kucharczyková, B., Keršner, Z., 2019. Fracture response of fine-grained cement-based composite specimens with special inclusions. Solid State Phenomena 292, pp. 63 – 68. Vyhlídal, M., Klusák, J., 2020. A Crack Approaching the Edge of the Aggregate. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series 20 (2), 47−52. Vyhlídal, M., Rozsypalová, I., Šimonová, H., Kucharczyková, B., Vavro, L., Vavro, M., Němeček, J., Rovnaníková, P., Keršner , Z., 2022. Effect of petrographic composition and chemistry of aggregate on the local and general fracture response of cementitious composites. Frattura ed Integrità Strutturale 16 (60), 13 – 29. Williams, M. L., 1956. On the stress distribution at the base of a stationary crack. Journal of Applied Mechanics 24, 109–114. Zacharda, V., Němeček, J., Šimonová, H., Kucharczyková, B., Vyhlídal, M., Keršner, Z. , 2018. Influence of interfacial transition zone on local and overall fracture response of cementitious composites. Key Engineering Materials 784, 97−102.