PSI - Issue 42

Ayse Cagla Balaban et al. / Procedia Structural Integrity 42 (2022) 284–291 Ayse Cagla Balaban et al. / Structural Integrity Procedia 00 (2019) 000 – 000

291

8

References

ASTM standard C297/C297M-04., 2004, Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions. Philadelphia, PA: ASTM International. ASTM standard C365/C365M-11a., 2011, Standard Test Method for Flatwise Compressive Properties of Sandwich Cores. Philadelphia, PA: ASTM International. ASTM standard C364/C364M 07., 2007, Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions. Philadelphia, PA: ASTM International. Balaban A.C. and Tee K.F., 2019, Strain Energy Release Rate of Sandwich Composite Beams for Different Densities and Geometry Parameters. Theoretical and Applied Fracture Mechanics 101: 191 – 199. Balaban A.C. and Tee K.F., Toygar M.E., 2019, Low Velocity Impact Behaviour of Sandwich Composite Structures with E-Glass/Epoxy Facesheets and PVC Foam, Procedia Structural Integrity, Volume 18, Pages 577-585, ISSN 2452-3216. Castanié B., Barrau J.J. and Jaouen J.P., 2002, Theoretical and Experimental Analysis of Asymmetric Sandwich Structures. Composite Structures 55(3): 295 – 306. Di Bella G., Borsellino C., and Calabrese L., 2012, Effects of Manufacturing Procedure on Unsymmetrical Sandwich Structures Under Static Load Conditions. Materials & Design 35: 457 – 466. Guler C., Ulay G., 2010. Some Technological Properties of Foamed Composite (Sandwich) Panels., Suleyman Demirel University Faculty of Forestry Journal, ISSN: 1302-7085, Seri: A, No: 2. 88-96. Hayman, B., Berggreen, C., Jenstrup, C. and Karlsen, K., 2008., Advanced Mechanical Testing of Sandwich Structures, In:8th International Conference on Sandwich Structures, ICSS 8, Porto, Portugal, pp. 417 – 427. Klepka, A.; Staszewski, W.J.; DiMaio, D.; Scarpa, F.; Tee, K.F.; Uhl, T, 2013, Sensor Location Analysis in Nonlinear Acoustics Used for Damage Detection in Composite Chiral Sandwich Panels. Advances in Science and Technology, 83, pp. 223-231. Noor A.K., Burton W.S., Bert C.W., 1996, Computational Models for Sandwich Panels and Shells. Applied Mechanics Reviews 49(3): 155 – 199. Polyakov V. 2001, Local Effects at Bending of Nonsymmetric Sandwich of Composite and Soft Filler. Composite Structures 54(2-3): 325 – 330. Toygar M.E., Tee K.F., Maleki F.K., Balaban A.C., 2019, Experimental, Analytical and Numerical Study of Mechanical Properties and Fracture Energy for Composite Sandwich Beams., Journal of Sandwich Structures & Materials 21(3): 1167 – 1189. Zenkert D., 1995, An Introduction to Sandwich Construction, Chameleon, London.